Classical LOPO Red Terracotta Wall Tile Project – Hamburg Museum

Project: Germany Hamburg Museum in Shanghai World Expo
Time: 2008
Product Item: SD670/KW670/SD870/KD63/KWS6375
Product Size: 220x105x52mm

Hamburg Museum is a peculiar building, does not require air conditioning and heating, while it was able to keep the indoor seasons 25 degrees Celsius constant temperature, the building’s external energy consumption is only 10% of ordinary houses. The red terracotta wall tile building, about 18 meters high, is shaped like a “drawer” that opens in four directions, and is integrated with living and office functions. It has compact size, good insulation and air tightness. Thereby reducing the winter heating and summer cooling energy consumption. Sun, human or indoor electrical and other passive heat source of heat, can meet the vast majority of the room heat demand, the Hamburg government called it “with the ecology of the highest standards of sustainable building.”

“Hamburg House” is a total of five floor building, one to four-floor extension of the original building, “commercial and residential mix,”feature, divided into work area and living area, will be used to show the multimedia Hamburg people’s daily lives. The fifth floor of 450 square meters of solar power generation equipment, accounting for half of the roof, will provide the entire building operation required for about 80% of electricity. A three-dimensional “wish tree”, which runs through each floor of the case, is an innovative guided tour system that demonstrates the desire of the residents of Hamburg for future urban life, and Hamburg’s response to these aspirations.

“Hamburg House” is decorative with exterior red wall tile from LOPO China, the red terracotta wall tile is not an ordinary tiles, the color and firing methods are very special, with high-quality clay support, density is very large, can provide good insulation effect. In addition, unlike ordinary flat red uniform appearance,the size required for “Hamburg House” is different, the surface of sand and gravel bump of the brick makes the wall more texture. The supporting system of the external walls chosen by the designer is used to carry the weight of the brick wall and to the main structure of the building. It has a plus or minus 3.5 cm vertical adjustment, is conducive to balance error.

The reason why Hamburg Museum can be able to energy-saving environmental protection is in detail that its design and processing of the fine to the full use of high-tech and new materials are inseparable. We remember that this building consumes only 10% of the external energy sources of ordinary houses, but also should remember that this data is achieved through what kind of way.

The red brick exterior walls from LOPO China, nitrogen-filled glass, roof-top solar energy, and ventilation holes throughout the building provide a number of elaborate details that not only meet the low energy requirements of the Hamburg House passive rooms. Refined lively design also echoes the overall building clean and strong style, the color selected on the red terracotta facade tiles not only expressed the Hamburg Museum of traditional Chinese color understanding, but also convey a warm and comfortable life style, detail show designers Of human nature considerations.

LOPO New Online 3D Inkjet Terracotta Panel

LOPO 3D Inkjet terracotta panel has been worshipped and favored by designers since it was lunched to the market, Natural stone texture is natural, solemn and solid, but is limited by color, limited in colors, difficult to be controlled in terms of chromatic aberration, inferior in environmental conservation and prohibitive in price. LOPO 3D inkjet stone terracotta panel is analogous to the verisimilitude effects of natural stones, superior to natural stones in decoration effects and environmental conservation and more privileged in price. It is an ideal substitute of natural stone materials.

With advanced digital inkjet printing technology and great firing techniques, LOPO is able to present life-like patterns(including textures) on terracotta facade panels. LOPO 3D inkjet rainscreen panel can offer not only realistic reproduction of marble and other natural material but also the customized design, which can provide unlimited design options and enhance the aesthetic appeal of facades.

LOPO’s 3D inkjet printer is imported from Italy with 400dpi resolution(an effective resolution of more than 1200dpi), 4 greyscales and drop size larger to 84pL., and it can achieve an amazing replication of natural materials like marble and wood, as well as highly creative new designs. In addition to advanced printer and quality ink, LOPO’s expertise in glazing process and firing techniques are also essential to guarantee the sophisticated effect and durability of tiles.

Terracotta panels are natural and green exterior wall materials, it has unparalleled advantages such as lighter weight, easy installation, recyclable, low maintenance etc. The special-treated surface of inkjet printing has good performance in freeze thaw resistance and color persistence.

LOPO is always devote to offer the best exterior wall facade products to customers and designers, now we have develop 3d inkjet marble texture, granite texture and wood look texture terracotta panel. For more details, please refer to http://www.terracottapanel.com/3d-inkjet-facade-panel_c12.

Unique Superior Characteristics of LOPO Terracotta Wall Tile Materials

First, Natural and Environmental 
Terracotta clay bricks use a variety of clay as the main raw materials, while clay is the product of rock weathering that has gone through millions of years or even millions of years, the composition of the structure is very stable, will not produce secondary weathering cracking. And the clay itself does not contain radioactive material, It will not cause any harm to the human body, so LOPO clay bricks is currently the most environmentally friendly ceramic products on the market.

Second, the Ambient Air Humidity “Regulator”
LOPO clay bricks by physical extrusion molding through the tunnel kiln after dozens of hours of high temperature firing. The product has a certain degree of water absorption. When the rainy comes, the clay brick itself will automatically absorb part of the water and coexist in the body, when the scorching sun, the air is dry, it will automatically save the water slowly distributed out, and it can be a good regulation of air humidity. So when walk in split brick for the exterior Area of the area, there is always the feeling of blowing cool wind.

Third, Production and Application of Low-carbon
LOPO terracotta wall tile with clay, shale and cinder as the raw material by vacuum extrusion molding, natural drying and waste heat drying combined, and then into the tunnel kiln with natural gas fired from high temperature. The entire production process to achieve zero emissions of dust and waste water, carbon emissions to a minimum. In the application process, as split brick does not contain metal material, will not produce static electricity, it is not easy to vacuum, with self-cleaning function. As is known to all, the most important insulating material in aerospace engineering is supported by ceramics; clay is inherently good in thermal insulation. So LOPO split brick can well protect the building from the sun and ultraviolet radiation. Plus the ability to adjust the temperature of the environment and then adjust the temperature. It is really worthy of the whole low-carbon, low-carbon life.

Fourth, Long Lasting Life
Eve is a hundred years, a hundred years have passed, but you will find with LOPO terracotta wall brick decorative external walls of the building is still bright as ever. In fact, history and reality have clearly told us that the Great Wall has gone through two thousand years of wind and rain hymn, at the moment in our vision is still so beautiful. In fact, LOPO clay tile on the choice of materials and the brick wall of the ancient brick has a similar beauty; but in the formula, extrusion molding and firing process has been superior than the original hundreds or even thousands of times. Therefore, in a sense, that LOPO split brick holding a new century is too short, a thousand years is not long.

LOPO Terracotta Rainscreen Apply in Business Buildings

As a unique and advanced rainscreen system, terracotta ventilated facade system is widely used as a exterior wall facade decoration materials in recent years. Since terracotta rainscreen panel is made of natural terracotta clay materials, and it has rich color and surface design available, many architects and designers office building and business center prefer to use LOPO Terracotta facade panel. Here is some application projects of LOPO terracotta rainscreen.

Changsha Linkong NO.1 (Office building, business center)
Products Item No.: F451826
Dimension: 450x900x18mm

As an important part in building, curtain wall designing is carefully deliberated in model designing, color match and making technique so as to deliver a charismatic humanistic sentiment. Classical colors and tender textures of LOPO terracotta facade panel frill modern building tower and reduces arrogance and humanistic glamor of skyscrapers and to a clam and unhurried enterprise spirit.

Changsha Xincheng Science and Technology Park
Products Item No.: F501801 F5018886
Dimension: 500x1200x18mm

By ridding the complicated building designing and the succinct designing, terracotta panel empowers more intellectuality, wit and calmness to buildings on. In life, it is forever immersed in the ocean of knowledge and vast science and technology. Sure-footed grey is used to the outer wall of the building, frilling all in a fitting manner with a nonchalant sense of fashion.

Jiangshu Science and Technology Finance Tower
Products Item No.: F301877
Dimension: 300x600x18mm

Jiangshu Science and Technology Finance Tower combines grey terracotta panel with large-scaled glass curtain wall, which intensifies the virtual effects of building lines, demonstrates grandeur and sure-footed natural in the building and brings the business bearing to the full.

Why Vanke Choose LOPO China as Its Long-term Cooperator?

Vanke, the world’s largest professional residential developers, which was established in 1984, 1988 enter the real estate industry, and become the leading real estate company after 30 years of development. While LOPO was established in 2002, which is producing and supplying terracotta products such as terracotta facade, terracota louver, terracotta baguette terracotta wall tile, terracotta brick pavers, cultured stone from domestic to foreign. Today, LOPO has become vanke’s long-term cooperator.

To the knowledge of Vanke, strict process monitoring and management machanism is ayardstick to be compilled with. Vanke is stringent regarding control of product quality and aptitude of suppliers and sets strict requirements on more than 100 indexes under 11 aspects covering aptitudes of suppliers, material standard and product quality. With its outstanding product quality, LOPO terracotta has passed its strict test and become its supplier for curtain wall.

With over ten years of experience, LOPO China goes from strength to strength from a toddler to and excellent brand in terracotta panel in leaps and frogs. That LOPO has surpassed its rivals and become the supplier for curtain wall for Vanke Real Estate would raise higher requirements on quality, performance, quality and service of products so that it can realize mutual benefit and win-win results with high quality and high service.

With spacious house type and fancy decoration, rows of classical buildings form a magnificent landscape scroll where both space and time gathers to expose the most splendid chapter. Terracotta panel can bring a unique style of elegance and dignity to the city life teeming with high-rises and its designing reveals ingenuity of its designers.

LOPO China is honor to cooperate with Vanke, because they have the same vision. Since Vanke adhere to the construction of high-quality residential products, promote the development of eco-environmental protection technology and application of China’s real estate industry, and is committed to a sustained leader and China’s outstanding green enterprises. And LOPO is committed not only to the development of our company but also the responsibility of our society and environment. We will put our greatest effort to harmonize our mutual home with green products. As LOPO and Vanke has some mission in same, we believe they will be more and cooperation in the future.

LOPO Updates CE Certificate for Terracotta Products Recently

Recently LOPO Terracotta Products Corporation Limited updates the newest CE Certificates approved by ISET S.R.L(ISTITUTO SERVIZI EUROPEI TECNOLOGICI) and verified to EN14411:2012 Standard. The certificate No. Is IT011430LP160912S. The accepted test products including Terracotta Panel, Terracotta Baguette, Terracotta Brick, Terracotta Tile. This certificate can be checked for validity at www.iset-italia.eu.

LOPO is devote to put our greatest effort to harmonize our mutual home with green products, and offer the best solutions and service for architects and designers from all over the world. Just contact us at any time if you need us!

LOPO Terracotta Baguette Project – Xiamen University Shengnuo Research Institute of Nonferrous Metals

Xiamen University Shengnuo Research Institute of Nonferrous Metals

Products: Terracotta Baguette

Item No.: T408569

Size: 40x85mm

Xiamen University Shengnuo Research Institute of Nonferrous Mmetals is located at Siming Road, Siming District of Xiamen City. It was donated by the Fujian Shengnuo Group, while Xiamen university provide land for construction.

Xiamen University Shengnuo Nonferrous Metal Research Institute is mainly engaged in advanced copper alloy materials, rare earth materials, based on Aluminum Alloy materials and tungsten alloy materials, research and development and application of industry strategy, will be committed to creating a support for the innovation and development of copper Shengnuo Company, to promote the development of discipline in Xiamen University, an important innovation service platform in Shanghang’s economic and social development.

The construction area of Xiamen University Shengnuo Nonferrous Metal Research Institute is about 13154sqm, The main building was design by Mr. Li Lixin Designer from the Architectural design and Research Institute of Xiamen University. The exterior wall facade combines stone with terracotta baguette, using the brick red colors and light colors which is loved by campus as always. The light colored marble weakens the heavy feeling of the original brick red colors, giving people the feeling of a low-key, unassuming academic spirit, but also exudes the vitality of students full of youthful spirit positive force!

It is an honor for LOPO China to be able to participate in the construction process of the construction of the Xiamen University Shengnuo Nonferrous Metal Research Institute main Buildings. LOPO sunscreen baguette can achieve compelling visual effects with profiled surface grooves and textures, available in natural, grooved, strip-line, and wood texture finishes. Glazed finishes, available in matte and semi-gloss, feature white or colored clay slip coating applied to the terracotta body to impart colors or textures.

With excellent engineering team and skilled workers, LOPO continues to constantly innovate in the range of terracotta products. Independent development and innovation capacity are our source of infinite energy to keep our products improving and meet diversified needs of customers.