A Basic Overview About Architectural Terracotta

As time goes by, people found that the terracotta on many treasured buildings is deteriorating and deteriorating across the nation. One reason is the weather, another reason is because of the steel rods used to support and anchor historical terracotta elements is rusted. Those looking for ways to restore or replace it can now take advantage of materials that look exactly like historical terracotta, but are lighter and more durable. This article will answer some basic questions about one of these materials.

What is architectural terracotta?
It is a building material which is used to restore or replace terracotta elements and cladding. Like historical terracotta, architectural terracotta is made with clay material. It also contains aggregates, minerals, and other elements to add reinforcement and strength. The terracotta material can be used to perfectly replicate the colors, textures, finishes, and shapes found in historical terracotta elements. It is suitable for a variety of applications, including cladding for walls and columns, flat panels, and architectural elements such as domes, bas relief, and sculpture.

What finishes are available for the modern replacement?
This versatile material may be glazed or unglazed, can have a glossy or matte finish, can incorporate one or several colors, and can be finished to resemble granite. A number of textures are also available. Some of the more common ones are smooth, tooled, combed, and lined.

Is architectural terracotta available in panels?
Yes. When large sections of terracotta need to be replaced, usually the best preferred method is using panels.The maximum length for terracotta wall cladding panels is 1800mm, while the maximum width is 600mm. Thicknesses of architectural terracotta panels range from a little over a quarter of an inch to about an inch and a half. Panels made from this material are typically light enough to be used as cladding for walls.

What are the major reasons to use architectural terracotta?
One of the most basic reasons is that there currently terracotta panel is becoming more and more popular in the world. Other advantages of architectural terracotta compared to other curtain wall material, it is lighter, easier to handle, faster to install, and highly durable.

The Best Alternative Product To Natural Stone - Artificial Culture Stone Veneer

It is nothing new that people always have the desire to personalize their homes during the decoration. the simplest ways to make changes is paint, trim and cabinetry but they are limited in the affects they can provide. The innovation's that building materials manufacturers have devised give the do it yourself in many new ways to decorate and personalize their property. Using brick or manufactured stone materials is one approach that gives a stunning result. One of the easiest projects that the home owner can safely undertake is using the new thin stone veneer products. These product's produce a material that has all the aesthetic characteristics of natural stone in texture and finish but are 90% lighter and require much less skill to yield a good finished result.

Stone veneer has a variety colors and textures choices that are best suited for interior use. Let's say your home has an entry way that is plain and some what drab. The interior dimensions of an entry often won't allow us to use full thickness whole stone, but will accommodate thinner artificial stone. Most manufactured stones are usually 3/8's of an inch thick or less, but the width and lengths are the same as whole brick. The principles to apply culture stone veneer are much simpler than that of whole stone. Usually use mortar to put stone together, but the newer artificial stones can be put up using acrylic adhesives that have no VOC, or volatile organic compounds, that are often hazardous.

Using vendor resources will also give the do it yourself a complete list of the required material's and complete instructions to make a perfectly finished project in a timely fashion. Often a project can get bogged down because of the lack of information without a good set of references,. The home improvement industry has made great strides in information technology geared to the occasional typical home owner project. The utilization of the vendor will be helpful in product selection and helpful tips geared to keep potential problems to a minimum.

LOPO China supply an affordable, durable, versatile, competitive price manufactured Stone veneer product well suited for both exterior and interior applications. Our Artificial Cultured Veneer Stone is light weight and easy to install on a wide variety of interior and exterior applications and it requires no footing or support ledges.

Tips on How to Maintain Terracotta Panels

Terracotta tiles always gives a home warm and inviting looking, so many houses owners like to decorative their floors, roofs or walls because this material with this kind of materials. And terracotta tiles, known as 'burnt earth', have been a one of the popular building materials for more than a thousand years. A terracotta panel is extremely attractive and versatile besides being fairly cost effective. This kind of terracotta clay material is also in great demand because it can save a great deal of energy. While a terracotta panel is not only easy to install with terracotta baguette or tile components, but also very easy to clean and maintain. Please keep in mind that is it is necessary to do some proper maintenance to ensure that the terracotta panel looks attractive for as long as possible.

Below are some tips to make sure your terracotta panel maintain well:
1. First, wipe off or sweep away any dirt or debris from the terracotta panel. This step can help avoid any scratches on the surface of the material, so it should be done as often as necessary.

2. When dirt and dust accumulates on terracotta panel surface, use a soft material to clean the surface. You must pay attention to not use any harsh materials on the panels or else, because it will get scratched very easily. While you can use plain water to clean your exterior wall panels often, you should also use a good cleaning product to remove accumulated dirt.

3. Do not use harsh chemical products on the terracotta panels because they might discolor or damage them. It is unfortunately that many of the commonly available household cleaning products are not meant to be used on terracotta. It is best to invest in high quality products designed especially for this material. No matter in what case, you should only ever use a new cleaning product after first trying it out on a small area that is out of sight.

4. You can using a specialty product to seal the surface of the terracotta panels since this helps protect the clay panels from any damage. The process of sealing needs very long time since it involves many steps. But it reduces the need for frequent cleaning beyond dusting and mopping/wiping. Then you should avoid using harsh detergents on it that will strip the sealant once the surface has been sealed.

If your terracotta panel is maintained in a correct way, it will retain its warm good looks for a very long time. Interestingly, exterior wall terracotta panel is designed to weather naturally and beautifully the material, so it does not need a lot of cleaning when it is used on external surfaces since.

What You Need to Know About Artificial Cultured Stone?

Artificial cultured stone is used on the outdoor wall of homes and buildings all over the world. This kind of products can provide a unique and different overall finish to your design with its natural clay material and color pigment finishes.

Before you make any decisions on how to complete your build you should know that using cultured stone is better than natural stone,. Your architect may have already told you complete to your project in a stone finish or it may just be a personal choice, but before start doing anything, you will be suggested to learn as much as you can about the product, after that, then you can determine if it is the right choice for you.

Firstly, you will be pleased to know that cultured stone is very solid and durable. It has a very long lasting and can offer you a great return on your investment. Rather than spending a fortune every few years doing repairs to the outdoor wall decoration of your home, this product can last for more than 40years, which providing you with the perfect finish.

The material of natural clay is authentic and visually appealing. Manufactured stone veneercan keep you apart from the crowd outdoor wall, make your house stand out on the street and enable you to be unique in a road where all the homes look the same. This cultural stone may be the best solution you have been looking for if you don't like to be the same as everyone else and you want your home to look great compared to your neighbors.

Cultured stone is light weight, which is the reason why it's more favored by architects over natural stone. It isn't as thick and due to its weight it is quick and easy to install, which makes it the perfect choice and helps you save money.

If you have set your heart on stone to complete your project, then artificial stone wall cladding is a an affordable solution. Depending on where you live, stone can be the perfect finish to your build and without it, your new build could look bland and boring. Natural stone is going to be expensive, you can be prepared for that, but if you're working to a tight budget you can get the same visual appeal by using the manufactured product to provide you with the aesthetic appeal you are looking to achieve.

Cultured stone is very easy to install, which speeds up the installation process and reduce the installation cost. When you are in the process of remodeling your home or building a new home, every cent counts. You have nothing to lose if you can save money here and there by using a high quality and durable product that will look the same while cheaper to buy and cheaper to install. 

When you choose cultured stone for your home, there are two very important considerations you have to factor into your decision. First is where you plan to purchase the product, second is spending the money on quality installation.

When you buy artificial culture stone, it is very important to ensure you take special note of the quality. If you can see it in person, feel it and touch it and ask the supplier to show you the product cut in half. This is because a large number will have cement in the center that is what this product is. You need to ensure that the stone veneer doesn't show the cement center when installed, because it will ruins the overall appeal and makes it look fake.