Terracotta Panel Installation

Step 1: Surveying and Setting Out
1.Recheck the civil engineering's hand-over datum line;

2.Check the indoor elevation of each construction layer, move the indoor elevation line to the outer wall's working surface, and do deviation measurement of the building outline dimension, to determine the standard line for the drying hanging terracotta panels;

3.Taking the standard line as the benchmark, put the frame lines on the wall according to the arrangement drawing, and mark well;

Step 2: Installation of Corner Connector
1.Hang two installation control lines on the two ends of a signal curtain wall with 0.5~1.2mm steel wires.

2.Determine the corner connector's installation mark according to the stand column's installation position. When welding the corner connector, the corner connector's position should be aligned to the chalk line, and temporarily spot weld the middle corner connector on the same stand column, and check and adjust the verticality of corner connectors on the same stand column; after qualified, full weld the corner connectors and embedded parts; after completion, proceed with the antirust treatment for the welded seams.

Step 3: Installation of Stand Columns
Install the stand aluminum alloy columns in place layer by layer from the bottom up; fix the stand columns on the corner connectors with bolts, and determine the distances between the stand columns and the main body’s wall surface by means of the wall surface end line; adjust the middle stand column's verticality, and after qualified, spot weld the gaskets, nuts and bolts;

Step 4: Installation of Transverse Beam
When installing the transverse beam, you should snap the line, and ensure firm connection between the stand column and the transverse beam, and the beam spacing should match the height of terracotta panel

Step 5: Installation of Fire Protection Layer Between The Layers
According to the design drawing's requirements, fix the galvanized steel plate first and then evenly lay fire prevention cotton, and seal the interspace between the galvanized steel plate and the construction structure with fireproof glue.

Step 6: Installation of the Terracotta Panel
1.Set on the corner of one curtain wall steel wire plumb line with the upper and bottom ends fixed, and set a vertical steel wire line every 3 to 4 meters in the middle; the construction team installs layer by layer based on the vertical lines, to ensure the curtain wall panel's verticality to be consistent with the vertical seam size.

2.Install the terracotta panes layer by layer from bottom to top, and in each layer install first the terracotta panel on the corners, and then install the terracotta panels in the middle. When installing the terracotta panels in the bottom row, gradually fill joint sealing glue strips in the vertical seam between two terracotta panels.

3.When installing the terracotta panels, first mount the bottom fasteners on the transverse beam, and each terracotta panel needs at least two fasteners, and place the first row of terracotta panels on the bottom fasteners, and fill joint sealing glue strips between two Step 
.
4.Mount the middle fasteners on the transverse beam, on the one hand, to fix the first layer of terracotta panels, on the other hand to provide support for installing the next layer of terracotta panels; 

Afterwards, repeat the above-mentioned installation process, and install the top convergent panel at last.

Step 7. Terracotta Panel Cleaning
After installation, the terracotta panel surface should be washed by high pressure water or cleaned with a brush, and it is forbidden to use solvent chemical detergent to clean the terracotta panel;

Quality Assurance Measures

1.According to the width of the building, set up enough vertical and horizontal lines to meet the requirements, to ensure the channel steel skeletons are at the same plane after installation.

2.Fittings and gaskets at the two ends of the transverse beam should be installed in the desired locations on the stand columns, and should be installed firmly, and the joint seam should be tight;

Why Culture Stone Is Called Culture Stone?

Have you every wondering why culture stone is called culture stone? Actually, culture stone is not just a single stone, it has nothing about any cultural meaning. The stone is the result of the processing of itself, it is the expression of a certain decorative effect processing and production methods. Culture stone is not only can maintain the natural color of the lines of the original style, but also coupled with the deployment of color change. What’s more, it can show exhaustive the content and artistic stone texture.

Artificial culture stone is an age-old, strong and durable construction technique products which is used for exterior cladding, fences, garden walls, fireplaces, supports, pool surrounds, trail markers and sculptures (cairns). The three-dimensional look of stacked culture stone can be created with true stone,artificial stone or rock paneling.

Culture Stone Veneer is a favorite veneer style of today's contemporary architects. When installed, the long and narrow Stack Stone with its square edges provides a modern look when installed. The rectangular stones comparison rules, uniform effect. These artificial stones re-defines the height and width of the surface of the puzzle, simplifying installation.

Terracotta Baguette from LOPO China

Terracotta baguette, also called terracotta louver, sunscreen baguette, is a special terracotta facade elements. This kind of terracotta building materials have become increasingly appealing to architects with the widely use of terracotta facade cladding. Terracotta sunscreen baguette offers an excellent combination of both functionality and aesthetic appeal as shading and design elements. Terracotta baguette is usually in the shape of tube with square, rectangular, triangular or oval cross-section. Multiple profiles and limitless colors of terracotta baguettes make themselves integrated naturally and artistically with both the whole building exterior wall and the interior decoration.

Terracotta baguette is usually used to cover window areas or in front of glass facades. When terracotta baguette is used as shading and applied in window areas, it can ensure enough natural light and enough air ventilation for indoor . The terracotta baguette with oval cross-section can be installed at different angles for achieving an ideal sun shading effect. It is also ideally fulfill the requirement of sun shading and design aesthetic for the overall facade cladding when used in front of glass facades.

Terracotta Baguette can be used as design elements going with different facade surface like terracotta facade cladding, natural stone curtain wall, glass facades. The natural feel, multiple shapes and boundless colors make terracotta baguette either an important role in the overall facade sign or embellishments integrated harmoniously with facade surface.

Terracotta baguette is an ideal product to used as partition elements indoor which can be a special decorative elements and also keep a certain privacy at the same time. Natural color and multiple patterns of terracotta baguette can create different visual effects.

Terracotta baguette are also good options for covering some specific area or facilities like ventilation appliance or substation equipment, which will ensure harmonization for the overall project.

LOPO China has wide range of terracotta baguette products in common shapes and cross-sections. Terracotta Baguette in the color and shape desired by the customer for specific projects are also available.

Benefits of Artificial Culture Stone Veneer

Artificial culture stone veneer is a popular building material for both exterior and interior decoration. It is the point that when you see homes with beautiful stone facings, you can’t identify if it's real stone or manufactured. Actually, manufactured stone it is quite virtually indistinguishable from real stone due to its craftsmanship and top quality design. Manufactured culture stone is created through a process that gives it the look and feel of real natural stone, while manufactured stone veneer comes without all the headaches that using real stone can give you.

Natural culture stone is the heaviest material you can use for things like house exteriors and interior design, too. All that weight creates problems. It is difficult for you to slap real stone up on the outside of a house or an interior wall. It is necessary to use a concrete base to support the weight of the stone and create the right surface for it to adhere to.

But the concrete base adds even extra weight, so you have to make sure the wall and the floor can withstand that weight if you insist to use natural stone on an interior wall or accent. Even just using natural stone on a fireplace can mean reinforcing the floor or worse--discovering that it's simply not safe to do so because it can't be reinforced properly for some reason.

Good news is that you can use manufactured stone without concerning those problems. The weight of manufactured stone is far less than natural stone. It does no required any structural changes at all if using cultured stone on a fireplace. Besides that, artificial cultured stone is non-combustible, just like real stone, so it's perfectly safe to use, too. And you also don't need a concrete base or backing to use manufactured stone veneer inside or outside. Cultured stone can be installed on almost any surface, which cuts down the weight and the prep time, so installation takes less time and costs less at the same time.

Despite the lower cost, you'll end up with the look of real, natural stone that can fool anyone. You won't have to worry about your facing, fireplace, interior wall or accent looking fake or cheap. With the different colors and styles of manufactured stone veneer that are available today, you can have the look of almost any type of natural stone you want for a fraction of the price.

The look of stone is the look of quality, and will raise the perceived value of your home as well as its actual value. And stone decoration is not just a fad or just a trend. It's been used in home design since ancient times and will never go out of style or look old and dated. Manufactured stone  really does supply all the beauty of natural stone without the cost, weight and installation problems, so what are you waiting for, choose artificial cultured stone for your home decoration directly!

A Basic Overview About Architectural Terracotta

As time goes by, people found that the terracotta on many treasured buildings is deteriorating and deteriorating across the nation. One reason is the weather, another reason is because of the steel rods used to support and anchor historical terracotta elements is rusted. Those looking for ways to restore or replace it can now take advantage of materials that look exactly like historical terracotta, but are lighter and more durable. This article will answer some basic questions about one of these materials.

What is architectural terracotta?
It is a building material which is used to restore or replace terracotta elements and cladding. Like historical terracotta, architectural terracotta is made with clay material. It also contains aggregates, minerals, and other elements to add reinforcement and strength. The terracotta material can be used to perfectly replicate the colors, textures, finishes, and shapes found in historical terracotta elements. It is suitable for a variety of applications, including cladding for walls and columns, flat panels, and architectural elements such as domes, bas relief, and sculpture.

What finishes are available for the modern replacement?
This versatile material may be glazed or unglazed, can have a glossy or matte finish, can incorporate one or several colors, and can be finished to resemble granite. A number of textures are also available. Some of the more common ones are smooth, tooled, combed, and lined.

Is architectural terracotta available in panels?
Yes. When large sections of terracotta need to be replaced, usually the best preferred method is using panels.The maximum length for terracotta wall cladding panels is 1800mm, while the maximum width is 600mm. Thicknesses of architectural terracotta panels range from a little over a quarter of an inch to about an inch and a half. Panels made from this material are typically light enough to be used as cladding for walls.

What are the major reasons to use architectural terracotta?
One of the most basic reasons is that there currently terracotta panel is becoming more and more popular in the world. Other advantages of architectural terracotta compared to other curtain wall material, it is lighter, easier to handle, faster to install, and highly durable.

The Best Alternative Product To Natural Stone - Artificial Culture Stone Veneer

It is nothing new that people always have the desire to personalize their homes during the decoration. the simplest ways to make changes is paint, trim and cabinetry but they are limited in the affects they can provide. The innovation's that building materials manufacturers have devised give the do it yourself in many new ways to decorate and personalize their property. Using brick or manufactured stone materials is one approach that gives a stunning result. One of the easiest projects that the home owner can safely undertake is using the new thin stone veneer products. These product's produce a material that has all the aesthetic characteristics of natural stone in texture and finish but are 90% lighter and require much less skill to yield a good finished result.

Stone veneer has a variety colors and textures choices that are best suited for interior use. Let's say your home has an entry way that is plain and some what drab. The interior dimensions of an entry often won't allow us to use full thickness whole stone, but will accommodate thinner artificial stone. Most manufactured stones are usually 3/8's of an inch thick or less, but the width and lengths are the same as whole brick. The principles to apply culture stone veneer are much simpler than that of whole stone. Usually use mortar to put stone together, but the newer artificial stones can be put up using acrylic adhesives that have no VOC, or volatile organic compounds, that are often hazardous.

Using vendor resources will also give the do it yourself a complete list of the required material's and complete instructions to make a perfectly finished project in a timely fashion. Often a project can get bogged down because of the lack of information without a good set of references,. The home improvement industry has made great strides in information technology geared to the occasional typical home owner project. The utilization of the vendor will be helpful in product selection and helpful tips geared to keep potential problems to a minimum.

LOPO China supply an affordable, durable, versatile, competitive price manufactured Stone veneer product well suited for both exterior and interior applications. Our Artificial Cultured Veneer Stone is light weight and easy to install on a wide variety of interior and exterior applications and it requires no footing or support ledges.

Tips on How to Maintain Terracotta Panels

Terracotta tiles always gives a home warm and inviting looking, so many houses owners like to decorative their floors, roofs or walls because this material with this kind of materials. And terracotta tiles, known as 'burnt earth', have been a one of the popular building materials for more than a thousand years. A terracotta panel is extremely attractive and versatile besides being fairly cost effective. This kind of terracotta clay material is also in great demand because it can save a great deal of energy. While a terracotta panel is not only easy to install with terracotta baguette or tile components, but also very easy to clean and maintain. Please keep in mind that is it is necessary to do some proper maintenance to ensure that the terracotta panel looks attractive for as long as possible.

Below are some tips to make sure your terracotta panel maintain well:
1. First, wipe off or sweep away any dirt or debris from the terracotta panel. This step can help avoid any scratches on the surface of the material, so it should be done as often as necessary.

2. When dirt and dust accumulates on terracotta panel surface, use a soft material to clean the surface. You must pay attention to not use any harsh materials on the panels or else, because it will get scratched very easily. While you can use plain water to clean your exterior wall panels often, you should also use a good cleaning product to remove accumulated dirt.

3. Do not use harsh chemical products on the terracotta panels because they might discolor or damage them. It is unfortunately that many of the commonly available household cleaning products are not meant to be used on terracotta. It is best to invest in high quality products designed especially for this material. No matter in what case, you should only ever use a new cleaning product after first trying it out on a small area that is out of sight.

4. You can using a specialty product to seal the surface of the terracotta panels since this helps protect the clay panels from any damage. The process of sealing needs very long time since it involves many steps. But it reduces the need for frequent cleaning beyond dusting and mopping/wiping. Then you should avoid using harsh detergents on it that will strip the sealant once the surface has been sealed.

If your terracotta panel is maintained in a correct way, it will retain its warm good looks for a very long time. Interestingly, exterior wall terracotta panel is designed to weather naturally and beautifully the material, so it does not need a lot of cleaning when it is used on external surfaces since.